Rotary Scraper
Rotary Scraper
MRA
Product Features
Not deburring too much, Not removing too much, This is what you need!
New suggestion for deburring tool!
Able to remove bur only without scratching work material.
We are offering φ3 shank type, ideal for deburring in narrow area or very small volume removing. φ6 shank type, not only standard deburring use but also ideal for deburring at deep edge area.
φ6 shank type
- Optimized HSS tool for much volume deburring or deburring in deep narrow area or deep edge area.
- Maximum safety rotation speed 3,600min-1
Item Code | Shank dia. | OAL | Effective | Fulte type | |
---|---|---|---|---|---|
MRA-RS6 | φ6mm | 100mm | 66mm | Straight | |
MRA-RS6S | φ6mm | 100mm | 66mm | Spiral |
Recommended Grinder
MRA-PG50265 Straight Type Low Speed Model |
|
---|
φ3 shank type
- Optimized HSS tool for very small volume deburing or deburing in narrow area
- Maximum safety rotation speed 100,000min-1
Item Code | Shank dia. | OAL | Tip Angle | |
---|---|---|---|---|
MRA-RS3-5 | φ3mm | 45mm | 5° | |
MRA-RS3-10 | φ3mm | 45mm | 10° |
- Optimized HSS tool for deburring of aluminum alloy
- Maximum safety rotation speed 100,000min-1
Item Code | Shank dia. | OAL | Effective Cutting Length | |
---|---|---|---|---|
MRA-RS3S | φ3mm | 45mm | 15mm |
Recommended Grinder
- Maximum Rotation Speed
- 50,000min-1
- Required Air Pressure
- 0.4~0.7MPa
- Chucking Width
- φ3mm
(φ2.35 collet is optional)
- Maximum Rotation Speed
- 60,000min-1
- Required Air Pressure
- 0.4~0.7MPa
- Chucking Width
- φ3mm
(φ2.35 collet is optional)
GEM NEWMOTOR MODEL-101E
Energy Saving, Eco
- Maximum Rotation Speed
- 48,000min-1
- Required Air Pressure
- 0.3~0.5MPa
- Chucking Width
- φ3mm
(φ2.35 collet is optional)